A Class

Sensor manufacturer	315MHz
Sensor frequency
Sensor part number	A0025407917
Sensor printing number	A0025407917
Learning type	O/A
Tire nut torque value (Nm)	150

Relearn New Sensor IDs.

Ensure all tires are inflated to the pressure listed on the tire placard. Vehicle must be driven for at least 10 minutes, while maintaining speed above 16 mph in order for system to learn new sensor Ids. If spare tire sensor Id is being programmed, a TPMS tool is necessary.

NOTE: The drive speed should be controlled between 16 mph (25km/h) and 64 mph (100km/h) .

RESET Tire Pressure:

1. Inflate all tires to the pressure indicated on tire placard.

2. Turn ignition to ON position (engine off) .

3. Press 'forward/back' button on steering wheel until trip and odometer are displayed.

4. Press 'UP/DOWN' button until tire inflation pressure monitor is displayed.

5. Hold down reset button (located on instrument cluster) until 'MONITOR CURRENT TIRE PRESSURE?' Is displayed.

6. Press '+' button 'TIRE PRESS, MONITOR ACTIVATED-PRESS. DISPLAY AFTER DRIVING A FEW MINS. ' Is displayed.

7. If 'REATIVE-TIRE PRESS. MONITOR!' Appears, repeat relearn procedure.

8. If 'TIRE PRESSURE-CHECK TIRES!' Appears, indicates tire pressure too low, adjust pressures accordingly

AU/CN/US Mercedes CL Class 2006.10~2010.12(315MHz)

AU Mercedes CLK Class 2006.01~2011.12(315MHz)

AU/CN/US Mercedes CLS Class 2006.01~2011.12(315MHz)

AU/CN/US Mercedes E Class 2006.01~2010.12(315MHz)

AU/CN/US Mercedes GL Class 2006.01~2010.12(315MHz)

CN/US Mercedes ML Class 2006.01~2010.12(315MHz)

CN/US Mercedes R Class 2006.01~2009.12(315MHz)

AU/CN/US Mercedes S Class 2005.12~2013.12(315MHz)

AU/CN/US Mercedes SL Class 2005.05~2012.12(315MHz)

AU/CN/US Mercedes SLR Class 2008.01~2009.12(315MHz)

AU/CN/US Mercedes SLR McLaren 2008.01~2009.12(315MHz)