Relearn procedure:

General recommended method of use:

1. Long press the TPMS button until the screen displays TPMS1, then long press the TPMS button until the screen displays TPMS1 SET, and finally long press the TPMS button until the screen does not display TPMS1 SET is to set the TPMS standard mode successfully.

2.Stop and turn off the lock car for more than 20 minutes, and then start the vehicle at a speed of 30km/h or more as far as possible to maintain a constant speed for more than 15 minutes, until the instrument panel shows the tire pressure data of 4 tires or the tire pressure data of 4 tires are refreshed, that is, the automatic match is successful, if not, please repeat this stop and turn off and drive for more than 15 minutes of operation 2 to 3 times.

Conservative use method:

1.Use OBD learning to learn the 4 sensor ids into the vehicle tire pressure system and clear the fault code.

2.Long press the TPMS button until the screen displays TPMS1, then long press the TPMS button until the screen displays TPMS1 SET, and finally long press the TPMS button until the screen does not display TPMS1 SET to set the TPMS standard mode successfully.

3.Stop and turn off the lock car for more than 20 minutes, and then start the vehicle at a speed of 30km/h or more to maintain a constant speed for more than 30 minutes, until the instrument panel shows the tire pressure data of 4 tires or the tire pressure data of 4 tires are refreshed, that is, the automatic match is successful, if not, please repeat the operation of stopping and turning off and driving for more than 30 minutes 2 to 3 times.